Automotive bus interfaces

CAN & LIN to analog signals

A-Module is a compact gateway that decodes vehicle network frames and maps selected parameters to galvanically isolated analog outputs for HIL rigs, workshop testers, and retrofit installations where only voltage levels are available.

Overview

Dual bus front-end

ISO 11898 CAN (high-speed) and ISO 17987 LIN on a common firmware stack. Frame filtering and periodic signal extraction are configured via a documented register map.

Analog outputs

Up to eight channels: 0–5 V or 4–20 mA (per channel), 12-bit effective resolution, configurable scaling and slew rate limiting for noisy plant models.

Bench-ready

Terminal power 9–32 V DC, screw terminals, status LEDs, and optional DIN-rail enclosure. Intended for engineering evaluation, not in-vehicle OBD deployment.

Technical summary

CAN2.0A / 2.0B, up to 1 Mbit/s, configurable acceptance filters
LIN2.0 / 2.1 master or slave listen-only modes
Analog out8 × 0–5 V or 4–20 mA, isolated grounds
LatencyTyp. < 5 ms CAN RX → analog update (signal dependent)
ConfigurationRS-485 maintenance port; DBC / LDF import (desktop tool)
Environment−20 … +70 °C operational, IP20
StatusPre-series — documentation and samples for integrators

Specifications reflect engineering revision B2. Contact us for pinout and EMC reports.

Typical applications

  • Hardware-in-the-loop coupling when the plant accepts voltage only
  • Workshop signal simulators derived from live bus traffic
  • Teaching and R&D benches for automotive network courses
  • Legacy gauge or amplifier interfaces without CAN controllers

Contact

For integration notes, register map, and sample availability:

info@a-module.com

A-Module is an informational product line site. No online store. OEM and lab inquiries only.